Concrete Milling
At Surfprep we offer a full range of concrete milling services.
We have a large variety of well maintained bobcat milling heads that range in width from 75mm up to 600mm, with the ability to mill down to 50mm per pass and carry out work on all grades of concrete and epoxy surfaces. Our concrete milling heads can cut channels, bevel edges or even profile large areas. All our bobcats are road registered and arrive complete with hazard lights, flashing beacons, reversing beacons (white noise) and rear view mirrors.
Our operators are licensed to a minimum of class 2 with WTR endorsements and all hold current sitesafe passports and first aid certificates. 24/7 coverage available.
Click images to view slideshows of our concrete milling work »
Customer: Fulton Hogan
Job: Dart 2 - Newmarket rail corridor widening project, Auckland
Description: These concrete piles where poured in unstable ground conditions and hence the smooth finish required was not achieved.
Customer: Clearwater Construction Ltd
Job: Westfield Plaza, Manukau City
Description: Surfprep’s bobcat milling 40mpa cementitious levelling compound off at a depth of 20mm per pass and 250mm wide.
Customer: The Tile People Ltd
Job: Sylvia Park, Auckland
Description: Surfprep’s Dingo milling out a channel in the 30mpa concrete floor to make way for new aluminium expansion joints.
Customer: Fulton Hogan
Job: Dart 2 - Newmarket rail corridor widening project, Auckland
Description: FH Asked Surfprep if we could help. We designed a bracket to enable and excavator to pick up and operate our concrete mill and away we went.
Customer: Fulton Hogan
Job: Dart 2 - Newmarket rail corridor widening project, Auckland
Description: In some cases we were required to simple smooth off the rough finish; in other cases we needed to mill off more concrete to correct the alignment of the pile.
Customer: Fulton Hogan
Job: Dart 2 - Newmarket rail corridor widening project, Auckland
Description: The piles were tied up.
Customer: Fulton Hogan
Job: Dart 2 - Newmarket rail corridor widening project, Auckland
Description: And the textured finish was perfect for shot blasting against.
Customer: Clearwater Construction Ltd
Job: Westfield Plaza, Manukau City
Description: Gap7 sized milled material ready to be picked up. We use a 1800mm wide broom bucket for this.
Customer: Clearwater Construction Ltd
Job: Westfield Plaza, Manukau City
Description: Typical edge line and texture left by mill. Edges can be saw cut to tidy up and milled surface can be ground to reduce texture if required.
Customer: The Tile People Ltd
Job: Sylvia Park, Auckland
Description: Machinery is connected to vacuums or water jetting is used to suppress dust.
Customer: The Tile People Ltd
Job: Sylvia Park, Auckland
Description: The Dingo’s compact size means we call get in to confined spaces and still move around.
Customer: The Tile People Ltd
Job: Sylvia Park, Auckland
Description: Milled channel when complete, 200mm wide and 20mm deep.
Customer: Haydn & Rollett Ltd
Job: Inland railway port, Hamilton
Description: Surfprep’s bobcat milling to level a concrete slab prior to the construction of a water tank plinth.
Customer: Westfield NZ Ltd
Job: Downtown Plaza, Auckland City
Description: 60mm has been milled off of the existing concrete slab to make way for the insertion of new 40mm pavers.
Customer: Fulton Hogan
Job: Dart 2 - Newmarket rail corridor widening project, Auckland
Description: Surfprep’s Dingo and milling head being lifted in to place by crane.
Customer: Westfield NZ Ltd
Job: Downtown Plaza, Auckland City
Description: 60mm has been milled off of the existing concrete slab to make way for the insertion of new 40mm pavers.
Customer: Fulton Hogan
Job: Dart 2 - Newmarket rail corridor widening project, Auckland
Description: We were required to mill down to level a raised platform on a concrete bean to allow for the correct placement on the new bridge deck sections.
Customer: Fulton Hogan
Job: Dart 2 - Newmarket rail corridor widening project, Auckland
Description: The nature and size on the Dingo mill allows for work to be completed in very tight spaces.
Customer: Fulton Hogan
Job: Dart 2 - Newmarket rail corridor widening project, Auckland
Description: The finished job.
